Orion 20VROT - Manual (Page 37)

35
To call a videotext page
Leaf through the pages with the PAGE ( / ) - button (forward or
backward).
Note: you will not necessarily find an existing page. for every page
number you enter..E.g. you have called the page no. 116, but it
will not appear on your screen. This happens because the broad
casting station momentarily does not offer this page. Available
page numbers you will find inside the station's table of contents
(toc). (most stations offer this toc on Videotextpage 100).
Enter the three-digit page number with the
number buttons.
Example:
You want to display page 300.
Enter: 3 then 0 and 0.
To correct a faulty input, enter the wrong page
number completely (all three digits), then
enter the correct page number.
The Four Colored buttons (red, green, yellow and blue) correspond to the colored areas in the videotext's bottom line.
These buttons enable quick access to the associated pages. (Applicable to fast text only)
Inside the videotext mode you cannot change to another broadcasting station..
To switch to another channel, leave the videotext mode by pushing the TEXT/MIX/TV button.
Push SUB PAGE button (0000).
The screen's left lower corner will display: - - - -
To call sub-page 2 enter: 0 0 0 2 .
Your input will be displayed in the left lower corner: 0002.
It may take some time until the sub-page 2 will be broadcasted.
The sub-page will be displayed not before it's broadcast.
To leave the time text mode push SUB PAGE(0000) button again.
Within the time text mode no other pages than the sub-pages of the selected videotext page can be
called. To call other videotext pages you must leave the time text mode.
To magnify the letters push F/T/B button.
You can magnify either the upper or the lower half of the screen.
Each push on F/T/B buttons between the screen's upper and lower half and the full screen.
(F/T/B = Full / Top / Bottom)
Pushing REVEAL will give you the hidden answers to the questions on a Quiz-page.