Installation, Remove the shipping restraints – Oki PM4410 User Manual
Page 12
Advertising
E-10
Pacemark 4410 Setup Guide
Installation
Remove the Shipping Restraints
Save the shipping restraints and packing materials in case
you ever need to ship the printer.
1. Remove the pieces of shipping tape, then peel the protective plastic
film off the digital display.
2. Press on the area(s) marked “PUSH” and open the printhead access
cover.
3. Remove the printhead shipping restraint and its retaining screw. Be
sure to keep this restraint/screw: it is needed to lock the printhead in
place should you ever need to move or ship the printer.
Advertising