Printer features, Preset menu configurations, Tear feature – Oki PM4410 User Manual
Page 57
Advertising
E-55
Pacemark 4410 Setup Guide
Printer
Features
Preset Menu Configurations
Once you have made changes in Menu settings, you can save them in
one of two preset storage areas — CFG1 and CFG2 — and use them
instead of the factory settings.
To switch back and forth between stored settings:
1. Press ON-LINE/RESET.
The printer goes off line.
2. Press CONFIG.
The CFG designation on the display changes.
3. Press ON-LINE/RESET.
The printer goes back on line with the new CFG showing on the
display.
For information on how to store Menu settings as CFG1 or CFG2, see
Section 1 of your on-line Pacemark 4410 User’s Guide.
Tear Feature
Use this feature to advance continuous forms up to the tear position by
pressing TEAR (1).
1
Advertising