Oki C3520 - Manual (Page 40)

Configuring your machine.... > 40
> After Operation Time-out, the display automatically
reverts to the Enter PIN ID screen if Access Control is
enabled.
> The length of the Operation Time-out depends on the
setting in Menu Mode>Admin Setup >System Setup >
Return to Stand-by Time.
T
HE
S
CANNER
/C
OPIER SECTION
M INIMUM C ONFIGURATION R EQUIREMENTS
To make the best of this MFP, the following configuration is
required:
To send Faxes: (C3530MFP)
> A PSTN telephone line connection.
To send e-mails:
> TCP/IP network.
> A SMTP and an optional POP3 server.
> Default “From” Address (this MFP’s Address).
To file document(s) via intranet
> FTP, HTTP, or CIFS Protocol environment.
> Windows 2000, Windows XP, HTTP or FTP server.
I NTERNET C OMMUNICATION F EATURES
P RE -I NSTALLATION I NFORMATION
The MFP has to be set up properly on your network to perform
scan to e-mail and other functions. In order for other network
devices to find the MFP on the network, the following network
parameters have to be set:
1. DHCP enable:
2. IP Address: . . .
3. Subnet mask:. . .