Oki C3520 - Manual (Page 98)

Maintenance > 98
F
USER REPLACEMENT
The fuser is located inside the printer just behind the four image
drum units.
1. Switch the MFP OFF.
2. Lift the scanner.
WARNING!
If the MFP has recently been powered on, some fuser
components will be very hot. Handle the fuser with
extreme care, holding it only by its handle, which will
only be mildly warm to the touch. A warning label
clearly indicates the area. If in doubt, switch the
printer off and wait at least 10 minutes for the fuser to
cool before opening the printer cover.
<
<
<
<