Quantum ATL M-Series - Manual (Page 187)

Appendix D Regulatory Statements
English
ATL M-Series User’s Guide 169
Industry Canada (Digital Apparatus)
4
Reference: Interference-Causing Equipment Standard, ICES-003,
Issue 2
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
CISPR-22
Warning!
4
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
Notice for USA and CANADA Only
4
If shipped to USA, use the UL LISTED power cord specified below
for 100-120 V operation. If shipped to Canada, use the CSA
CERTIFIED power cord specified below for 100-120V operation.
Plug Cap
Parallel blade with ground pin (NEMA 5-
15P configuration)
Cord Type: SJT, three 16 AWG (1.5 mm
2
) or
18 AWG (1.0 mm
2
) wires
Length Maximum 15 feet (4.5m)
Rating Minimum 10 A, 125 V
Laser Statement
4
CAUTION: With all panels and enclosures in place, this product is
rated as a Class I laser product. The bar code scanner inside this
product, however, is a Class II laser. Avoid exposure to the laser
light emitted from the bar code scanner. Do not stare into the beam.