Changing the wide negotiation setting – Quantum ATL M-Series User Manual

Page 79

Advertising
background image

Chapter 3 Changing the Library Configuration

Changing the Wide Negotiation Setting

ATL M-Series User’s Guide

61

Changing the Wide Negotiation Setting

3

The

Wide Negotiation

option controls whether the library robotics

negotiates wide data transfer mode. Normally, this negotiation is

performed by the host.

To enable or disable

Wide Negotiation

:

1

Access the

Configuration

screen (see

Accessing the

Configuration Screen

on page 53).

2

Press the

Up

or

Down

buttons until

Wide Negotiation

is

highlighted.

3

Press

Select

.

4

Use the

Up

or

Down

buttons to select the desired

Wide

Negotiation

setting. The available settings are

Enabled

and

Disabled

.

5

Press

Select

.

To return to the

Configuration

screen without changing the

option setting, press

Cancel

.

6

Press

Main

to return to the main screen.

Note:

This option does not enable or disable wide data

transfers; it only controls the ability of the library to

negotiate for such transfers.

Note:

The default setting is

Enabled

.

Caution:

If you do not return to the main screen after

changing this setting, your change will not be

saved to NVRAM.

Advertising