Quantum ATL M-Series - Manual (Page 51)

Chapter 2 Basic Operations
Using the Mailbox
ATL M-Series User’s Guide 33
10 Use the Move command on the Mailbox screen to move the
imported cartridge to another data element.
11 If you removed a data cartridge from the mailbox, replace it:
a Repeat steps 1 through 4 to open the mailbox again.
b Reinsert the data cartridge you removed in step 5 into the
mailbox.
c Reinsert the magazine into the library.
d Close the magazine access door.
e On the Mailbox screen, press Re-Lock .
The magazine access door locks.
Exporting a Cartridge in MAP Mode 2
To export a cartridge in MAP mode:
1 If there is currently a data cartridge in the mailbox, remove it:
a On the main screen, press Mailbox .
The GUI displays the Mailbox screen (see figure 22 ).
b Press Open .
The GUI displays the Mailbox - OPEN screen (see figure 23 ).
c Press the button next to the top left magazine access door
and open the door.
d Pull the magazine forward until it stops.
e Remove the data cartridge from the mailbox.
f Reinsert the magazine into the library.
g Close the magazine access door.
h On the Mailbox - OPEN screen, press Re-Lock .
The library locks the magazine access door and inventories the
mailbox.