Tru-Test Electric Fence Security System - Manual (Page 2)

2
ENGLISH
The Energizer Monitor Unit
Congratulations on your recent purchase of an Energizer Monitor Unit electric fence security
system.
The unit is a combined electric fence energizer and alarm system designed primarily for security
fencing applications. When armed, the unit continuously checks the fence voltage and triggers an
alarm if the fence voltage falls outside of preset limits (e.g. when an intruder attempts to breach or
climb the fence).
The system can provide a high level of security to a wide range of installations, and includes the
following features:
•
Easy to use.
• Powerful electric fence energizer with up to 4 joules output energy.
• Adjustable fence voltage up to 12,000 volts.
• Reduced false alarms, due to a unique dynamic fence monitoring option that distinguishes
sudden fence voltage changes from slow changes caused by environmental degradation.
• Provision for up to four Keypads and/or Keyswitches (altogether).
• Full gate access control using low voltage cabling for improved system reliability.
• Outputs for auxiliary warning equipment, and a siren up to 15 W.
• Easy connection to a tele-dialler or your master alarm system.
• An internal battery keeps the unit working during a power failure.
• Compatible with solar power installations.
• ‘Flash’ computer memory allows easy on-site software upgrades.
• Flashing lamp warnings of poor battery and loss of mains power.
• Low voltage isolated mains power pack for improved safety.
• Many system configuration option settings available for maximum flexibility.
• Built-in fault diagnostics for efficient servicing.
Getting Started
The unit has a set of configuration options that can be set using a Keypad. These are usually set by
the installer, but may be re-configured later if required.