Other problems – TAG MIL-BOOK 200 User Manual
Page 123
8-14 Troubleshooting
If you are using the battery power, make sure that the battery is not
discharged.
When you turn on the computer, it stops after POST.
Restart your computer.
The message “Non –System Hard disk boot sector invaled” appears
on the screen after you turn on the computer.
Make sure that there is no floppy disk in the floppy disk drive. If there
is, remove it and restart the system.
If this message appears when you are booting from the hard disk,
insert a bootable disk in the floppy disk drive and check the condition
of the hard disk.
Make sure that the hard disk is recognized correctly in the SCU
program.
The message “Non-System disk” or “Disk error” appears on the
screen after you turn on the computer.
If you are deliberately trying to boot from a floppy disk, replace the
disk with a bootable one and press any key to continue booting.
If you are booting from the hard disk, make sure that there is no
floppy disk in the floppy disk drive. If there is, remove it and restart
the system.
If this message appears when you are booting from the hard disk,
insert a bootable disk in the floppy disk drive and check the condition
of the hard disk.
Make sure that the hard disk is set correctly in the SCU program.
Other Problems
The date/time is incorrect.
Correct the date and time via the operating system or SCU program.