Installing the cd/combo/dvd rw drive – TAG MIL-BOOK 200 User Manual

Page 43

Advertising
background image

2-16

Operating Your Computer

NOTE: For Combo/DVD RW drive only.

This product incorporates copyright protection technology that is protected by method

claims of certain U.S. patents and other intellectual property rights owned by

Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home

and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

Installing the CD/Combo/DVD RW Drive

To install the CD/Combo/DVD RW drive:

1. Open the optical drive bay cover by pressing on both sides of the

release latch using your thumb and index fingers.

2. Insert the CD/Combo/DVD RW drive into the optical drive bay

located on the left side of the computer.

3. Close the optical drive bay cover to secure the CD/Combo/DVD RW

drive in place.

To remove the CD/Combo/DVD RW drive:

1. Open the optical drive bay cover by pressing on both sides of the

release latch using your thumb and index fingers.

2. Gently place the computer upside down.

3. Lift up the handle of the optical drive release knob and turn it

counter-clockwise. The CD/Combo/DVD RW drive will slide out
partially. Gently pull on it to remove it.

Advertising