Hard disk boot sector – TAG MIL-BOOK 200 User Manual

Page 93

Advertising
background image

5-14

Setup Configuration Utility (SCU)

CAUTION: You must enable this option first before formatting your hard disk drive

(HDD). Upon enabling this function, you will be asked to type in your HDD key. You

must remember the HDD key as you need to type it every time you boot up your

system.
If you did not enable this option and have already formatted your hard disk, then you

must “GHOST” the contents of your hard disk to another storage media before you can

enable this option for the first time.

IMPORTANT: If you should lose the HDD key, your dealer or the computer

manufacturer will not be responsible for any loss of data. You will need to re-format
your hard disk and thereby, lose all your original data.

Hard Disk Boot Sector

Sets if a warning message will appear when the hard disk boot sector
(partition table) has been changed. A checkmark ( ) indicates enabled,
while an underline (_) indicates disabled.

CAUTION: Set this item to disabled before installing an operating system, running
Fdisk

or Format program. Otherwise, the intended action will fail.

Advertising