Technicolor - Thomson DPL680 - Manual (Page 8)

Getting Started
EN
5
Digital Connections
Read instructions carefully when connecting
components to the receiver.
Digital Input Jacks can accept Dolby Digital (AC-3) or
PCM signals when compatible components are
connected.
TV Connections
TVs with RF input may need a RF modulator (not
included) for inputting audio / video signals.
Connecting the Antennas
The AM and FM antennas connect to the AM and FM
terminals on the system’s back panel.
They must be hooked up in order to receive clear
reception.
AM Loop Antenna
1. Uncoil the Antenna wire and locate the base end of
the AM antenna.
2. Press down on the Antenna tab to open the terminal.
3. Inert the antenna wires into the terminal and release
the tabs to secure the wires in place.
FM Antenna
Insert the FM pig-tail antenna into the FM Antenna
jack on the back of the unit.
SAT / DVD / CD Player / TV
COAXIAL DIGITAL IN (AUDIO)
Connect to coaxial digital output of
DVD, CD, SAT or other compatible
devices.
OPTICAL DIGITAL IN (AUDIO)
Optical Fiber Cable
Connect to optical digital output of
DVD, CD, SAT or other compatible
devices.
DVD / CD / SAT
R L
CD
IN
IN
OUT
SAT IN DVD IN IN OUT TV IN DIGITAL SUBWOOFER PRE OUT
S-VIDEO
FM ANTENNA AC ~ 120V 60Hz
TAPE
VCR
L
R
AUDIO
VIDEO OUT TO TV
TV
CD
DVD
SAT 1 2
CD DVD
SAT
COAXIAL
GND AM LOOP
DVD IN SAT IN OUT TO TV
VIDEO
AUDIO
4‰ FR FL SR SL CEN SUB 8‰
SPEAKERS
4‰
DIGITAL
TV
CD
DVD
SAT
1 2
CD
DVD
SAT
COAXIAL
HINT
• For FM reception, extend antenna to its full
length.
• For AM reception, rotate the antenna
horizontally to get better reception.
FM
ANTENNA GND
AM
LOOP
RF modulator
TV
RF cable
AV cable
The diagram shown above may varies from your actual RF
modulator, please refer to your RF modulator manual.
AV in
AV out
RF in RF out
DPL680 EN 4/8/04 4:00 PM Page 9