Tandy 16-289 - Manual (Page 12)

12
OPERATION
TURNING THE TV
ON/OFF
Press POWER on the TV’s front panel
or remote control to turn the TV on or
off.
SETTING THE ON-
SCREEN LANGUAGE
1. Press SET-UP on the remote con-
trol or FUNCTION on the front
panel until LANGUAGE appears
on the screen.
2. Press VOL + or – so the arrow
points to ENGLISH or ESPANOL
(Spanish).
3. The on-screen display automati-
cally clears in about 5 seconds.
Or, you can press
RECALL to
clear it.
All on-screen displays are now in
the selected language.
SELECTING THE INPUT
SIGNAL
Follow these steps to select between
receiving cable stations and receiving
broadcast channels.
1. Press SET-UP on the remote con-
trol or FUNCTION on the front
panel until INPUT SELECTION
appears on the screen.
Note: When you press SET-UP on
the remote control, VIDEO does
not appear as a selection. Press
TV/VIDEO on the remote control to
select VIDEO (see “Selecting TV
or Video” on Page 13).
2. Press VOL + or – so the arrow
points to AIR , CABLE , or VIDEO .
Select AIR if you are using an an-
tenna or CABLE if you are using a
cable service. Select VIDEO to
view the audio/video source con-
nected to the TV’s input jacks.
3. The on-screen display automati-
cally clears in about 5 seconds.
Or, you can press
RECALL to
clear it.
16-289.fm Page 12 Tuesday, July 20, 1999 10:57 AM