Tandy 16-289 - Manual (Page 14)

14
2. Select the input signal ( AIR or
CABLE ).
3. Use the remote control’s number
button(s) to select the channel
you want to store.
4. Press SET-UP on the remote con-
trol until the channel number,
ADD , and DELETE appear on the
screen.
5. Press VOL + or – so the arrow
points to ADD .
6. The on-screen display automati-
cally clears in about 5 seconds.
Or, you can press
RECALL to
clear it. The channel is added.
Manually Deleting a Channel
If the TV stored a channel you do not
want, follow these steps to delete the
channel from memory.
1. Press TV/VIDEO so TV is selected.
2. Select the input signal ( AIR or
CABLE ).
3. Press CH + or – or the remote
control’s number button(s) to se-
lect the channel you want to de-
lete.
4. Press SET-UP on the remote con-
trol until the channel number,
ADD , and DELETE appear on the
screen.
16-289.fm Page 14 Tuesday, July 20, 1999 10:57 AM