Tandy 16-289 - Manual (Page 15)

15
5. Press VOL + or – so the arrow
points to DELETE .
6. The on-screen display automati-
cally clears in about 5 seconds.
Or, you can press
RECALL to
clear it. The channel is deleted.
AUTO PICTURE
CONTROL
Press APC on the remote control to
display the Auto Picture Control status.
When
PICTURE RESET is set to ON ,
the TV’s picture shows the factory set-
tings. If you adjust the picture,
ON au-
tomatically changes to OFF (see
“Adjusting the Picture”).
If you have adjusted the picture and
want to return to the factory settings,
press
APC until PICTURE RESET ON
appears. If you want to return to the
picture controls you previously select-
ed, press
APC until PICTURE RESET
OFF appears.
ADJUSTING THE
PICTURE
Follow these steps to adjust the pic-
ture’s contrast, brightness, color inten-
sity, tint, and sharpness.
1. Press PICTURE on the remote
control or FUNCTION on the front
panel until the desired picture con-
trol appears.
2. Adjust the selected control level
by pressing VOL + or –.
The bar graph on the screen
shows the relative adjustment
level.
16-289.fm Page 15 Tuesday, July 20, 1999 10:57 AM