T+A Elektroakustik SADV 1245 R - Manual (Page 10)

10
Remote control of the SADV 1245 R
General
The SADV 1245 R can be remote operated with the 
remote controls F6 and F12 or with the system control
F1.
On the following diagrams all buttons used for the control
of the SADV 1245 R are marked '
   '. All other
buttons are without function for the SADV 1245 R.
The SADV 1245 R receives remote control commands
from the R
LINK –Master device (amplifier or surround-
receiver). It is switched ON with the     button.
Note:
If there is no master unit present, the SADV 1245 R can
be directly remote operated with the remote control set
(FBS12, FBS6) which is available as an optional
accessory.