T+A Elektroakustik SADV 1245 R - Manual (Page 33)

33
Menu Speakers
In this menu you can adjust speaker sizes, delays and
the volume level for each speaker channel. These
adjustments help to optimize the response of your
system. Note:
These settings have no effect for SACD playback, if in
menu 'Setup /Audio Menu' 'SACD output' = 'ON' is
selected.
The speaker settings only influence the signals of the
analogue multichannel output of the SADV 1245 R. They
have no effect for the digital output signals.
Front Size / Centre Size / Surround Size
Off Choose this setting, if no speakers are connected
to the channel
Large Choose this setting for all speaker outputs which
are connected to large speakres, capable of
reproducing frequencies below 50 Hz.
Small Setting for speaker outputs connected to small
(satellite) speakers.
Subwoofer
On if a subwoofer is present in the system
Off if no subwoofer is present in the system (in this
case at least the front channels require large
speakers).
Front Dist./ Front L Dist. / Centre Dist.
Rear Dist./ Rear L Dist.
Adjust these settings according to the speaker distances
from your listening position.
Menu Movie Mode
With the help of this submenu you can adjust the volume
for each speaker channel to acheive equal volume for all
channels at your listening position.
Menu Music Mode
This menu is used to adjust the volume of each speaker
channel for SACD playback.