SENAO EnGenius EP-801 User guide [Page 5/167]
Basic Handset Features
1. 4-line LCD (Liquid Crystal Display)
a. The LCD display has LED (Light Emitting Diode) for backlighting.
line of LCD consists of icons.
c. Icons explanation from left to right
RSSI (Receive Signal Strength Indicator)
During a call, the number of bars is proportional
to the radio signal strength received.
(2.1) Call in-progress (ON/OFF-Hook)
Indicates which the phone line of Base is active.
(2.2) Intercom in-progress
Indicates if Intercom mode is active
Indicate the Handset ID which is making intercom with.
(3.1) Speaker Indicator
Indicate if the speaker is active
(3.2) Headset mode
Sound and Indication
(4.1) Enable ringer
(4.2) Disable ringer
(4.3) Ringer and vibrate mode
(4.4) Vibrate mode
(4.5) Message waiting indicator
Indicate if the speaker is disable
Two-Digit Address Index
Displays the 2-digit Handset ID.
Number of bars is proportional to the amount of battery time remaining.
lines of the LCD, maximum 16 characters each,
display status, message, menu selections, or user-editable
e The last line displays the left and right soft keys.
a. Rings to an incoming call and intercom call.