Topcom Butler E300 - Manual (Page 10)

6 Topcom Butler E300/Twin/Triple/Quattro
Topcom Butler E300/Twin/Triple/Quattro
5.7 Setting the volume
During a conversation you can set the volume by pressing the Up/Down / buttons. You
can set the volume alternatively in between 1-3.
5.8 Paging
When you press the Paging button on the base unit, the handset emits a ringing signal
for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing
on a handset.
5.9 Flash button (R)
When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
Press Menu button
ÆUse the Down button to scroll to ‘Settings’ and press
Æ Use the Up or Down button and select ‘Recall’ Æ Scroll to the flash time you want
with the Up or Down key and select .
5.10 Setting the ring volume and melody
5.10.1 Handset melody
Press Menu button
ÆUse the Down button to scroll to ‘Sound’ and press
Æ Use the Up or Down button and select ‘handset’ Æ Use the Up or Down
button and select ‘Melody’ ÆScroll to the melody you want with the Up or Down key
and select .
5.10.2 Handset ring volume
Press Menu button
ÆUse the Down button to scroll to ‘Sound’ and press
Æ Use the Up or Down button and select ‘handset’ Æ Use the Up or Down
button and select ‘Volume’ ÆScroll to the volume you want with the Up or Down key
and select .
5.11 Keytone setting
Press Menu button ÆUse the Down button to scroll to ‘Sound’ and press
Æ Use the Up or Down button and select ‘Key Tones’ Æ Select ON or OFF and
press .
You can turn the ringer volume of each individual handset ON or OFF by
simply press and hold the
key in standby.