Topcom Butler E300 - Manual (Page 12)

8 Topcom Butler E300/Twin/Triple/Quattro
Topcom Butler E300/Twin/Triple/Quattro
5.17 Changing the system PIN
The system PIN code (default = ‘0000’) is used to protect various settings like register rights,
access right to some menu’s in the phone. You can change the PIN:
Press Menu button
ÆUse the Down button to scroll to ‘System’ and press
Æ Use the Up or Down button and select ‘Change Pin’ Æ Enter the old pin and press
Æ Enter the new PIN and press OK Æ Enter the new PIN again to confirm and press
.
5.18 Switching the ECO (low radiation) mode ON/OFF
When low radiation is activated the base will emit 10% less during standby compared to the
normal power mode. During communication the handset power will be reduced depending
on the distance between handset and base.
You can turn this function ON or OFF:
Press Menu button
ÆUse the Down button to scroll to ‘System’ and press
Æ Use the Up or Down button and select ‘Low Power’ Æ Select ON or OFF and
press to confirm.
5.19 Using the alphanumerical keypad
With your telephone you can also enter alphanumeric characters. This is useful for entering
a name into the phonebook, giving a name to a hand-set, …
To select a letter, press the corresponding key as many times as is necessary. For example
to select an ‘A’, press ‘2’ once, to select a ‘B’, press ‘2’ twice and so on. To select ‘A’ and then
B consecutively, select ‘A’, wait until the cursor moves on to the next character, then press
‘2’ twice.
To select a space, press 1. To erase a single character press the delete
key. To delete
all characters press and hold the delete key.
The keypad characters are as follows:
Key First Second Third Fourth Fifth Sixth Seventh Eighth
press press press press press press press press
1 Space 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0