Basic settings – Thermador MES301HS User Manual
Page 30
30
Basic Settings
The appliance features various basic settings preset in the factory.
These basic settings can, however, be changed as necessary.
You can restore the factory settings to reverse any changes.
The example is shown in the illustration:
To change the basic setting for the Cook Time signal from short to long.
1. Press and hold ON/OFF until the appliance turns on.
2. Press and hold INFO for approximately 4 seconds.
The first basic setting appears in the display.
3. Press INFO repeatedly until the desired basic setting appears.
4. Use the settings dial to change the basic setting.
Now you can press INFO to select additional basic settings and change them
using the settings dial.
5. Press and hold INFO for approximately 4 seconds.
All changes are saved.
Press START/STOP. The changes are not saved.
Canceling Changes