Thermador MES301HS - Manual (Page 54)

54
1. Reinsert the door glass.
Make sure that the flat surface faces outward and the printed surface is on the
inside.
2. Put the cover in place and screw it back on.
3. Reinstall the door.
Maintenance
HeatĆresistant 230V / 25 Watt halogen bulbs with seals can be purchased through
retail stores or customer service. If purchasing through customer service provide the
appliance model and serial numbers.
WARNING: Ą
D Make sure the appliance and lights are cool and power to the appliance has
been turned off before replacing the light bulb(s). Failure to do so could result
in electrical shock or burns.
D The covers must be in place when using the appliance.
D The covers serve to protect the light bulb from breaking.
D The covers are made of glass. Handle carefully to avoid breaking.
Broken glass could cause an injury.
D The light socket is live when the door is open.
Always use a dry cloth to remove the halogen bulb from its packaging, otherwise the
life of the bulb will be shortened.
1. Turn off power to the appliance at the main power supply (fuse or breaker box) or
unplug the power cord.
2. Turn the cover to the left to remove.
3. Remove the bulb and replace with the same type of bulb.
4. Slip the new seals and tension ring onto the glass cover.
Installing the Door Glass
Replacing the Oven Bulb
ř