Before using select, Using select( to select data points from a plot – Texas Instruments TI-84 User Manual
Page 267
Chapter 11: Lists
264
example, you can use
Select(
to select and then analyze a portion of plotted
CBL 2™/CBL™ or CBR™ data.
Select(xlistname,ylistname)
Note:
Before you use
Select(
, you must have selected (turned on) a scatter plot or xyLine
plot. Also, the plot must be displayed in the current viewing window.
Before Using Select(
Before Using Select(
Before Using Select(
Before Using Select(
Before using
Select(
, follow these steps.
1.
Create two list names and enter the data.
2.
Turn on a stat plot, select
" (scatter plot) or Ó (xyLine), and enter the two list names
for
Xlist:
and
Ylist:
(Chapter 12).
3.
Use
ZoomStat
to plot the data (Chapter 3).
Using Select( to Select Data Points from a Plot
Using Select( to Select Data Points from a Plot
Using Select( to Select Data Points from a Plot
Using Select( to Select Data Points from a Plot
To select data points from a scatter plot or xyLine plot, follow these steps.
1.
Press
y 9 ~
8
to select
8:Select(
from the
LIST OPS
menu.
Select(
is pasted to
the home screen.