Texas Instruments TI-84 - Manual (Page 268)

Chapter 11: Lists 265
2. Enter xlistname , press
¢, enter
ylistname , and then press
¤ to designate list names
into which you want the selected data to be stored.
3. Press
Í. The graph screen is displayed with
Left Bound? in the bottom-left
corner.
4. Press
} or † (if more than one stat plot is selected) to move the cursor onto the stat
plot from which you want to select data points.
5. Press
| and ~ to move the cursor to the stat plot data point that you want as the left
bound.
6. Press
Í. A 4 indicator on the graph screen shows the left bound.
Right Bound?
is displayed in the bottom-left corner.