Texas Instruments TI-84 - Manual (Page 559)

Chapter 19: Communication Link 556
3. Press
Í to select
1:Transmit . The name and type of each item are displayed
line-by-line on the sending unit as the item is queued for transmission, and then on
the receiving unit as each item is accepted.
Note: Items sent from the RAM of the sending unit are transmitted to the RAM of the
receiving unit. Items sent from user data archive (flash) of the sending unit are
transmitted to user data archive (flash) of the receiving unit.
After all selected items have been transmitted, the message Done is displayed on both
calculators. Press
} and † to scroll through the names.
Sending to a TI-84 Plus Silver Edition or TI-84 Plus Sending to a TI-84 Plus Silver Edition or TI-84 Plus Sending to a TI-84 Plus Silver Edition or TI-84 Plus Sending to a TI-84 Plus Silver Edition or TI-84 Plus
You can transfer variables (all types), programs, and Flash applications to another TI-84
Plus Silver Edition or TI-84 Plus. You can also backup the RAM memory of one unit to
another.
Note: Keep in mind that the TI-84 Plus has less Flash memory than the TI-84 Plus Silver
Edition.
• Variables stored in RAM on the sending TI-84 Plus Silver Edition will be sent to the
RAM of the receiving TI-84 Plus Silver Edition or TI-84 Plus.