Toshiba Satellite Pro 6000 Series - Manual (Page 125)

125 Expansion Options
Using a mouse
Using a PS/2 mouse simultaneously with
AccuPoint II
To configure the PS/2 mouse to work with the AccuPoint II:
1 Open the Start menu, click Control Panel then Printers and
Other Hardware.
2 Click the Toshiba HWSetup icon.
3 Select the Pointing Devices tab.
4 Under Pointing Devices Options, select one:
❖ Auto-selected — configures the PS/2 mouse to work
when it is connected at power on, or the AccuPoint II to
work otherwise. Auto-selected is normally the default
option.
❖ Simultaneous — configures both the AccuPoint II mouse
and PS/2 mouse to work with the computer at the same
time. You must reboot the computer for the settings to
take effect.
HINT: When Auto-selected is the default, the computer can’t
detect a PS/2 mouse if you connect it after booting the
computer.
This can be changed in Toshiba Hardware Setup.
5 Click OK.
A message appears stating “The changes will take effect next
time the machine is rebooted. Reboot the machine now?”
6 Click Yes.
The computer reboots, and the PS/2 mouse is activated.