Toshiba Satellite Pro 6000 Series - Manual (Page 93)

93 Learning the Basics
Using SD
®
(Secure Digital) cards
❖ Do not remove a SCSI card while any of the SCSI devices
connected to it are operating.
Before removing a PC Card, stop it by clicking the Safely
Remove Hardware icon on the System tray. After the PC Card is
stopped, it is safe to remove.
Using SD
®
(Secure Digital) cards
If you do not already have a SD card inserted in the computer, you
may do so following the procedures outlined in
“Inserting an
SD®card” on page 159 .
Important: Do not use the Copy Disk function for SD cards. In
order to copy data from one SD card to another, use the following
procedure:
1 Format the target SD card in the same format as the source SD
card.
2 Insert the source SD card.
3 Create a temporary folder on the hard disk drive.
4 Copy the contents of the source SD card into the temporary
folder you created in step 3.
5 Remove the source SD card.
6 Insert the target SD card created in step 1.
7 Copy the file contents from the temporary folder to the target
SD card.
8 Eject the target SD card.