Toshiba Satellite Pro 6000 Series User Manual
Page 156
156
Enhancing Productivity
Inserting and removing PC Cards
Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before you
insert it.
To insert a PC Card:
1
Turn off the computer.
You may also hot swap a PC Card. Stop the PC Card by
clicking the Safely Remove Hardware icon on the System
tray. After the PC Card is stopped, it is safe to remove.
2
Locate the PC Card slot on the left side of the computer.
3
If the PC Card slots are locked, unlock them by turning the
computer over, locating the PC Card lock and sliding the lock
into the unlocked position.
4
Insert the PC Card.
If you have a Type III card, insert it into the lower part of the
slot. If you have a Type I or Type II card, insert it into either
the upper or lower part of the slot.
Inserting a PC Card
5
When the card is almost all the way into the slot, push firmly,
but gently, to ensure a firm connection with the computer. Do
not force the card into position.
6
To lock the PC Card in its slot, turn the computer over and
locate the PC Card lock. Slide the lock into the locked
position.