Telenetics Sunrise Series Modular Nest - Manual (Page 2)

Part No. TEL–09949, Rev A
June 2001
Page 2 of 34
Overview
This document covers:
• Information you need and activities you must complete before installing and
operating 326X Series Modem card(s) in the Modular Nest 9 and 21
Enclosure
• Procedures for removing and replacing a backplane installed in a Modular
Nest 9 or 21 enclosure
• A procedure for testing a backplane for proper installation and connection
Use this information with the Modular Nest 9 and 21 Operations and Installation
Guide (Part No. TEL–09564), shipped with the Modular Nest 9 and 21 enclosure,
which explains how to install, operate and maintain the enclosure. It also provides
instructions for installing and removing product cards from the enclosure.
Introduction
This notice provides information about new features and enhancements available
with 326X Series Modem cards and backplanes.
About the 326X Series Modem Documentation Set
The following documentation is shipped with your 326X Series Modem
(stand-alone and card units):
• 326X Series Modem User’s Guide (Part No. TEL–T0009)
• 326X Series Modem Reference Card (Part No. TEL–T0009-01)
For More Details on the 326X Modem’s...
• Configuration options (and equivalent AT commands)
• V.25 bis Automatic-Calling Unit
• NetView’s LPDA-2 dialing commands
• Diagnostic tests
...refer to the 326X Series Modem Reference Guide, which you can order through
your Telenetics sales representative or local distributor.