Warning – Telenetics Sunrise Series Modular Nest User Manual

Page 9

Advertising
background image

Part No. TEL–09949, Rev A

June 2001

Pre-Installation Information and Activities

Page 9 of 34

Make Busy backplanes are factory configured for Busy Out operation in their
destination country, as indicated in Table 1 or Table 2.

Warning

Only qualified service personnel should remove pin jumpers. A qualified service
person is one who is familiar with product operation, trained in the technology of
electrically powered information processing and business equipment and adequately
aware of the hazards associated with this equipment. Removal by unqualified
personnel could result in personal injury or equipment damage, which could
jeopardize your warranty and maintenance agreement. Users who are not qualified to
perform this action themselves should contact Telenetics or an authorized distributor
regarding available upgrade services.

Seul un personnel qualifié est autorisé à enlever
les cavaliers. Nous appelons qualifiée toute
personne familière avec le fonctionnement du
produit, ayant suivi une formation dans la
technique du traitement de l’information et des
équipements de bureau par système électrique et
connaissant les dangers liés à ces équipements.
Le recours à un personnel non qualifié pour cette
opération risque d’entraîner des dommages
corporels
et matériels ainsi que l’invalidité
éventuelle du contrat de garantie et de
maintenance. Nous conseillons aux utilisateurs
non qualifiés pour effectuer cette procédure de
contacter Telenetics ou un distributeur agréé pour
obtenir une liste des services de mise à jour
disponibles.

Table 1. Backplane Pin Settings for Busy Out, Modular Nest 9

Pin Pair

Function

U. S. A. and Canada:

Other UI Countries:

Left

1

TIP and RING

No jumper connector

Connected with jumper

Right

1

Make Busy and
Make Busy 1

Connected with jumper

No jumper connector;
not applicable

1

Inner backplane surface, as viewed from the rear of the Modular Nest.

Table 2. Backplane Pin Settings for Busy Out, Modular Nest 21

Pin Pair

Function

U. S. A. and Canada:

Other UI Countries:

Left

1

Make Busy and
Make Busy 1

Connected with jumper

No jumper connector;
not applicable

Right

1

TIP and RING

No jumper connector

Connected with jumper

1

Inner backplane surface, as viewed from the rear of the Modular Nest.

Advertising