TechniSat AX1 - Manual (Page 11)

6 Programming
6.1 Copying preprogrammation
Your ADR receiver ASTRASTAR AX 1 contains a factor y-
preprogrammation of free channels and DMX channels which, on
request, you can call if you have deleted your own
programmation.
> call the installation menu (see 4.1)
> call setting E7 “copy?” with or
> switch to “really?” with or
> switch to “save!” with or
> delete the channel table using the recessed (save)
key of the remote control
The procedure is indicated in the display with “Tabkopie”. After the
copy procedure the FAV table is deleted.
Additional channels you can programme according to 6.4. Your
own table must be reprepared according to 6.3.
6.2 Automatic tuning system (ATS)
To be able to save new ADR channels with unknown receive data
the ASTRASTAR AX 1 has an automatic tuning system (ATS). This
tuning system automatically saves all anti-interference digital radio
11
5.5 Alternate channels
> with
In this process, you always switch between the current and the
previously adjusted channel and it is irrelevant whether you have
changed the table in the meantime.
5.6 Sound
> with down, with up
> switch off completely with
5.7 DMX card messages
During the reception of DMX channels transmitter messages can
be transmitted to your ADR receiver. These messages are displayed
in English and can be indicated in the information display with
, as soon as the DMX LED is blinking.
PLEASE INSERT CARD INCORRECT CARD
PLEASE WAIT THIS CARD IS BLOCKED
WRONG CARD IS INSERTED PUSH BUTTON TO LISTEN
YOUR CARD IS INVALID PROGRAMME IS BLOCKED
INSERT OLD CARD
INSERT NEW CARD
THIS CHANNEL IS BLOCKED
THE CARD HAS EXPIRED
Text