TechniSat AX1 - Manual (Page 8)

8
4.2 LOF adjustment
To adapt the ADR receiver to older outdoor equipments you can
modify the factory-adjusted LOF of 9.75 GHz. Small frequency
failures which may occur are compensated by the automatic fine
tuning (AFC) of the ASTRASTAR AX 1.
> call the installation menu (see 4.1)
> call setting E3 “LOF 9750” with or
> switch to “LOF 10000” or “ISI_AB” or “ISI_ABC” with
or
> press or repeatedly until “Standby” appears in
the display
Analogously, you can remodify the LOF to 9.75 GHz. Please take
into consideration that you cannot receive all ADR channels with
an ISISAT equipment.
4.3 Display language
You can switch the display language between German, English,
Danish and Swedish.
> call the installation menu (see 4.1)
> call setting E2 “German” with or
> switch to the desired language with or
> press or repeatedly until “Standby” appears in
the display
Correspondingly, you can switch the display language again to
German. The messages of the smart card are not affected by this
modification. They always appear in English.
4.4 Deleting all channels
If you want to completely reprogramme your ASTRASTAR AX 1 you
can delete the entire channel memory. Take into consideration that
afterwards you have to programme new channels according to 6
“Programming”.
To avoid an unintended deletion of all channels a multiple safety
interrogation is integrated.
> call the installation menu (see 4.1)
> call setting E6 “delete?” with or
> switch to “really?” with or
> switch to “with RC!” with or
> delete the channel table using the recessed delete key
( ) of the remote control
The function can be interrupted before pressing (delete)
with or without deleting the channels.