Connecting the power cord, 5 connecting the power cord – Toshiba TEC B B-SX5T SERIES User Manual
Page 14
2. PRINTER SETUP
ENGLISH VERSION EO1-33036
2.5 Connecting the Power Cord
E2- 4
2.5 Connecting the
Power Cord
1.
Make sure that the printer Power Switch is in the OFF (
{
{
)
position.
2.
Connect the Power Cord to the printer as shown in the figure below.
3.
Plug the other end of the Power Cord into a grounded outlet as shown
in the figure below.
[QQ Type]
[QP Type]
CAUTION!
1. Make sure that the printer
Power Switch is turned to
the OFF position (
{
)
before connecting the
Power Cord to prevent
possible electric shock or
damage to the printer.
2. Use only the Power Cord
supplied with the printer.
Use of any other cord
may cause electric shock
or fire.
3. Connect the Power Cord
to a supply outlet with a
properly grounded
(earthed) connection.
Power Cord
Power Cord
Power Cord
Power Switch