Toshiba TEC B B-SX5T SERIES - Manual (Page 40)

APPENDIX 1 SPECIFICATIONS ENGLISH VERSION EO1-33036
A1.2 Options
EA1- 2
A1.2 Options
Option Name Type Description
Swing cutter module B-4205-QM A stop and cut swing cutter.
Rotary cutter module B-8204-QM Rotary cutter
PCMCIA interface
board B-9700-PCM-QM This board enables the use of the following PCMCIA cards.
LAN card: 3 COM 3CCE589ET (recommended)
ATA card: Conforming to PC card ATA standard
Flash memory card: 1MB and 4MB cards (See Section 2.9.)
Built-in LAN
interface board B-9700-LAN-QM This board enables the printer to be used in a LAN network.
USB interface board B-9700-USB-QM Installing this board enables a connection to a PC which has a
USB interface.
A1.3 Media
Please make sure that the media being used is approved by TOSHIBA TEC. The warranty does not apply when a
problem is caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service
representative.
A1.3.1 Media Type
Two types of media can be loaded for this thermal transfer and direct thermal printer: label or tag. The table
below shows size and shape of the media available for this printer.
NOTE:
To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or TOSHIBA
TEC Head Quarters.
Label Tag paper
Cut position
Cut position
Stop
position
Stop
position
Feed Direction
Black Mark
(on reverse side) Black Mark
(on reverse side) Refer to
NOTE 3 below.
D
A
?
A
C D
?
@
E
E
k
k
B
j