Topfield TF 5400 PVR - Manual (Page 35)

29
Chapter 4
Service Search
You have to perform service search after connecting the digital
receiver.
4.1 Searching satellite broadcasting services
This digital receiver can be operated with both fixed and mo-
torized antenna system. You have to configure antenna set-
tings according to your antenna system in the following order:
1. Configure LNB settings. (Refer to § 4.1.1 .)
2. Set the position of your desired satellites if you have a
motorized antenna. You can control the antenna in DiS-
EqC 1.2 mode or USALS mode. Refer DiSEqC 1.2 to
§
4.1.2 , and refer USALS to § 4.1.3 .
3. Perform service search.
4.1.1 Configuring LNB settings
There are in large two frequency bands for satellite broadcasts.
One is C band which ranges approximately from 4 to 6 GHz.