4 searching services, Searching services – Topfield TF 5400 PVR User Manual
Page 40
34
Service Search
lite Angle
if it is not correct.
4. Select the Goto the position command. Then the antenna
will turn toward your selected satellite calculating its
position.
5. If the receiving quality, which is displayed on the right
bottom on the screen, is not good, tune the antenna finely
with the commands of the Move menu. The changed po-
sition is automatically saved at one. At this time you
had better check the receiving quality of every trans-
ponder and choose the best one at the Transponder (or
Frequency
) option. It will be helpful to your fine tuning.
4.1.4
Searching services
To perform service search, select
the Installation > Satellite Set-
ting > Service Search
menu.
There are four service search methods:
• Searching every service of a satellite.
• Searching every service of a transponder.
• Searching one service of a transponder.
• Searching every service of a SMATV (Satellite Master
Antenna Television) transponder.
To search every service of a satellite, perform the following
steps: