Topcom Skyr@cer WBR 7201 N - Manual (Page 13)

ENGLISH
7
Setup the Broadband Router
4 Connection ID: Enter the Connection ID when necessary.
5 MTU: Enter the MTU size. (If the size is not specified, please leave the
default value at 1492.)
6 BEZEQ-ISRAEL: Only for Israel.
7 Connection Type:
• Continuous: The PPP-connection will always be active.
• Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will
disconnect when there is no more Internet traffic during the Idle
Time (minutes), entered in the field below.
• Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
JClick OK to proceed.
o L2TP xDSL: Used for cable modems with L2TP connection.
- IP Address info for L2TP xDSL -
• WAN connection: DHCP client or Fixed IP address
• Obtain an IP address automatically:
1 Host Name: Enter your Host Name if necessary.
2 MAC Address: Some Cable Internet Providers will keep the MAC
address of your computer in their server. In this case you should clone
the Mac address of your computer. Click Clone Mac Address to copy
your computers Mac address into the router.