Topcom Skyr@cer WBR 7201 N User Manual
Page 17
ENGLISH
11
Setup the Wireless Network
2
Enter the Wireless Network name (ESSID). By default it will be
“Topcom_” + six last digits of the MAC address.
3
There are 13 available radio channels. You are free to select one of
these channels.
J Click Apply to confirm.
4.3
Set the wireless Encryption
Three encryption settings are available: WEP 64bit, WEP 128bit and WPA(2).
J Choose Security Settings to access the encryption menu.
By default the encryption is disabled. In this screen you can select your type of
encryption.
You can find the MAC address at the bottom label of the router.
If you have more than one wireless router or access point in your
home or office, make sure not to use the same channel.
Topcom strongly recommends to enable encryption. This is the only way to
prevent that unwanted users access your wireless network.