Tascam CD-160 - Manual (Page 8)

– 8 –
3. Press the numeric buttons in the
following order;
They are automatically stored in the
program memory in order.
● Press "7" with the numeric buttons on
the unit or the remote control. "7"
appears in the Music Calendar, TRACK
No. "7" and next STEP "2" blink in the
display.
● When "+10" is pressed, "1-" will be lit in
the TRACK indication and "3" will blink in
the STEP indication.
When "5" is pressed, "15" appears in the
Music Calendar, TRACK No. "15" and
next STEP "4" blinks in the display.
● The same track can be programmed
repeatedly.
● To program in the stop mode, select a
track using the Â/¯ buttons (the
track number blinks). Press the
PROGRAM button to store it in memory.
4. Press the PLAY ( Á) button.
Programmed playback starts from the
first programmed track.
● Playback stops when the last
programmed track has finished playing.
● The programmed contents will be held
in memory even after programmed
playback has been completed or when
programmed playback is stopped by
pressing the STOP (
ª) button.
● To release the program mode, press the
PROGRAM button in the stop mode.
Ⅵ Checking the programmed
contents
The programmed contents can be checked
easily using the CHECK button.
1. Press the STOP (
ª) button.
2. Press the CHECK button.
Each time the CHECK button is pressed,
the TRACK number and STEP number
appear in the programmed order.
Ⅵ Clearing the program memory
1. Press the STOP ( ª) button.
2. Press the CLEAR button (more than 2
seconds) to clear the program memory.
● Press the OPEN/CLOSE (ø) button once,
and the program memory will be
cleared.
● The program memory will also be
cleared if the CD player's power is
switched off.
Ⅵ Changing the program
After programming is complete, unnec-
essary tracks can be deleted from the
original program or new tracks can be
added after a track originally programmed,
in the following way.
Ⅵ Renewing a track
1. Press the STOP ( ª) button, then press
the CHECK button to indicate the
desired STEP number in the display.
2. To modify the program, input the desired
TRACK No. using the numeric buttons.
The indicated track which was
previously programmed is modified.
Ⅵ Adding a track
1. Press the STOP ( ª) button.
2. Press the CHECK button until the last
step is shown in the display.
3. To add new tracks to a program, input
the track number using the numeric
buttons.
● The track is added after the indicated
track which was previously program-
med.
Ⅵ Deleting a specific track
1. Press the STOP ( ª) button, then press
the CHECK button to indicate the
desired STEP number in the display.
2. Press the CLEAR button.
● The track number displayed will be
deleted and the next track advances up.
● Repeat the same steps to delete other
track numbers.
All or one of the tracks, or a specified
portion (between A - B) of a track can be
played repeatedly. Program playback and
Random playback can also be repeated.
● To repeat random playback, press the
REPEAT ONE/ALL and RANDOM buttons
(REPEAT/ALL and RANDOM light).
Random playback of all tracks is
repeated.
● To repeat program playback, press the
REPEAT ONE/ALL and PROGRAM
buttons (MEMORY and REPEAT/ALL
Repeat Function
1. Press the PITCH CONTROL button.
The PITCH CONTROL button lights.
2. Turn the PITCH CONTROL knob right or
left to change pitch.
3. Turning right makes playback speed
faster within the range O ~ +7%.
4. Turning left makes playback speed
slower within the range O ~ –5%.
The Intro Check function allows only the
beginning of each track to be played for 10
seconds.
● This function is operational both at stop
and during normal playback.
1. Press the INTRO CHECK button.
2. Press the PLAY (
Á) button.
The INTRO indicator lights in the display.
3. Press the INTRO CHECK button again to
clear the Intro Check function.
● The Intro Check function also works
together with RANDOM and REPEAT
ONE/ALL functions. This function will not
stop until the STOP (
ª) button is
pressed.
● The Intro Check function also works
together with the PROGRAM function.
● To release the Intro Check function
while it is engaged, press the STOP ( ª)
button twice.
● Programming tracks is possible only
when the player is in the stop mode.
● The program playback function allows
you to program up to 32 tracks for
playback in any desired order.
● If more than 20 tracks are entered, the
rest will not be shown on the Music
Calendar display.
Ⅵ Programming required tracks
1. Press the STOP ( ª) button.
2. Press the PROGRAM button.
The player enters the program mode.
The MEMORY indicator lights in the
display.
The TRACK No. and STEP No. indicators
blink.
Example:
To program tracks in the order 7
∑ 4
∑ 15 ∑ 10 in the stop mode.
Program Playback
Intro Check Function