Tascam CD-160 - Manual (Page 9)

– 9 –
ENGLISH
Ⅵ Music search using SEARCH
buttons (
Ô/)
During playback, hold down the 
button to move the playing position quickly
in the forward direction, and hold down the
Ô button to move quickly in the reverse
direction.
During the manual search operation, sound
will be audible but the output level will be
lowered. This lets you search for any
required portion while checking the sound.
When the desired position is reached,
release the button to reenter the previous
mode.
The time counter shows various time
readouts, as follows.
Stop mode during normal playback:
1 EACH indicator
After the disc tray is closed with the disc
loaded, the EACH indicator lights in the
display and the player enters the
standby mode.
2 Total disc playback time (TOTAL)
Press the TIME button in the stop mode
to display the total disc playback time
and the total number of tracks on the
disc.
During normal playback:
1 Elapsed time display (EACH)
The elapsed time of the track being
played is then displayed in minutes and
seconds.
Time Counter Display
or
light). All programmed tracks are played
back repeatedly.
● To cancel Repeat playback and continue
normal playback from the current track,
press the ONE/ALL button repeatedly
until the REPEAT indicator disappears.
● Press the STOP (∑) button to abort the
operation.
∑ To repeat an entire disc
(All repeat mode)
1. Press the ONE/ALL button.
The REPEAT and ALL indicators light.
2. Press the PLAY ( Á) button.
Playback starts and, when the end of
the disc is reached, the player will
return to the beginning of the first track,
and then playback continues repeat-
edly.
Ⅵ To repeat one track
(Single repeat mode)
1. Press the ONE/ALL button twice.
The REPEAT and ONE indicators light.
2. Press the numeric buttons correspond-
ing to the required track.
The selected track is played, then when
the end of the track is reached, the
player will return to the beginning of the
track and playback starts again. In this
way, the selected track will be played
back repeatedly.
● This function does not work together
with Random function.
Ⅵ To repeat a designated section
(A-B repeat mode)
1. Press the PLAY ( Á) button to start
playback.
2. Designate the point at which playback
should start (point A) by pressing the
A-B button.
The REPEAT and A – indicators light.
Press
3. Press the A-B button again (REPEAT and
A-B light.) at the ending point (B).
● The portion (A-B) will be played
repeatedly.
● To cancel Repeat playback and resume
normal playback, press the A-B button.
● When you specify an A-B section during
programmed playback, pressing the
Â/¯ buttons to change the track
erases the A-B section.
● This function does not work together
with Intro Check and Random functions.
Ⅵ Music search using SKIP
buttons (
Â/¯)
The beginning of any track can be easily
located using the
 and ¯ SKIP
buttons during playback or in the ready
mode. This operation is indicated clearly in
the TRACK display.
∑ To skip to the next track
Press the ¯ button.
The player will skip ahead to the next track
each time the
¯ button is pressed. The
player can be advanced to the last track in
this way, but once the beginning of the last
track is reached, the player will not
advance even if the
¯ button is pressed.
∑ To skip back to the previous track
Press the  button.
The player will skip back one track each
time the
 button is pressed. If this
button is pressed in the middle of a track,
the player will skip back to the beginning of
the current track. To make it skip back to
the previous track, the button must be
pressed twice.
In this way, the player can be returned to
the beginning of the first track on the disc.
Music Search Operation
Press Again
Light