Toshiba GD-1210 - Manual (Page 132)

6 PRINTING LISTS AND REPORTS
130 Automatically Printing Lists & Reports
Setting the communication report output
The following conditions of the communication report output can be set.
MEMORY TX: OFF, ALWAYS, ON ERROR
DIRECT TX: OFF, ALWAYS, ON ERROR
MULTI TX: OFF, ALWAYS, ON ERROR
POLLING: OFF, ALWAYS, ON ERROR
RELAY ORIGINATOR: OFF, ALWAYS, ON ERROR
RELAY STATION:
OFF, ALWAYS, ON ERROR
RELAY DESTINATION: OFF, ALWAYS, ON ERROR
If the [ALWAYS] button is selected: The report is output after every communication is completed.
If the [ON ERROR] button is selected: The report is output when a communication error has
occurred.
If the OFF button is selected. The report is not output.
1
Press the [USER FUNCTIONS] button on the control panel.
2
Press the [ADMIN] button and then press the [PASSWORD] button.
3
Enter the administrator password (6 to 10 digits), and then press
the [ENTER] button.
y Ask your administrator to the administrator password.