Toshiba GD-1210 - Manual (Page 54)

2 SENDING A FAX
52 Sending Originals
5
Specify the remote Fax.
y Specifying by digital keys ( P.40 “Direct entry with digital keys”)
y Specifying by address book ( P.41 “Address book entry”)
6
Press the [START] button.
y The remote Fax is dialed immediately and communication is initiated.
y Canceling the direct transmission ( P.76 “Canceling direct transmission (during
scanning)”)
Memory transmission
In the memory transmission mode, originals are scanned at high speed and temporarily stored
in memory before transmitting.
y Up to 100 transmissions can be reserved.
y Up to 1000 pages can be stored in 1 transmission.
y You can specify two or more remote Faxes at one time.
y If the original cannot be sent (the remote Fax is busy or otherwise unavailable), the remote
Fax is automatically redialed repeatedly.
y Documents can no longer be added to memory if it becomes full midway during scanning. In
this case, reduce the number of originals you are sending, or try sending in the direct trans-
mission mode. ( P.51 “Direct transmission”)
y If an original is placed on the original glass, the scanning conditions can be changed for
each page. ( P.37 “Setting the scanning conditions for each page”)
1
Place the original(s).
y P.30 “Setting originals”
2
Press the [FAX] button on the control panel.
3
Press the [ADDRESS] button to enter the address menu, and then
press the [OPTION] button.