Toshiba GD-1210 - Manual (Page 40)

2 SENDING A FAX
38 Setting the Transmission Conditions
4
Specify the remote Fax.
y Specifying by digital keys ( P.40 “Direct entry with digital keys”)
y Specifying by address book ( P.41 “Address book entry”)
y Specifying by group ( P.42 “Group entry”)
y Specifying by multi-address transmission ( P.49 “Multi-address transmission”)
5
Press the [START] button.
y The first original is scanned.
6
Place the next original.
7
Select the [OPTION] button and set the transmission conditions for
the second original as required.
And press the [ENTER] button to complete the setting.
y The changeable scanning conditions for each page are the “RESOLUTION”,
“MODE”, “EXPOSURE” and “ORIGINAL”.
8
Press the [START] button.
y The second original is scanned.
y If there is another original to be scanned, repeat steps 5 through 7.
Be sure to carry out the operations within 45 seconds after the “To continue place docu-
ment on glass, and press START” appears. If the equipment is inactive for 45 seconds,
the scanned original is sent.