Toshiba GD-1210 - Manual (Page 22)

1 BEFORE USING FAX
20 Description of Each Component
10. [INTERRUPT] button
Use this button to interrupt the copy job in process and perform another one. The interrupted
job is resumed by your pressing this button again.
11. [JOB STATUS] button
Use this button to confirm the job status, printing status, and FAX transmission/reception sta-
tus of a print job, scan job and FAX job. ( P.66 “Checking Transmission Result”)
12. [ACCESS] button
Use this button when the equipment is managed under the department management or the
user management. If this button is pressed after copying, the next user needs to key in the
department code or user information, otherwise the copier function cannot be used. For the
department code or user management, see the User Functions Guide.
13. [ENERGY SAVER/SHUT DOWN] button
Use this button when you want to shut down the equipment or when you want the equipment
to enter into the energy saving mode. When you press this button, the menu for the energy
saving mode appears. Press the [SLEEP] button on this menu to enter into the energy sav-
ing mode and press the [SHUTDOWN] button to shut down the equipment.
14. [FUNCTION CLEAR] button
When this button is pressed, all selected functions are cleared and returned to the default
settings.
15. [STOP] button
Use this button to stop any scanning and copying operations in progress.
16. [START] button
Use this button to start copying, scanning and FAX operations.
17. [CLEAR] button
Use this button to correct numbers keyed in, such as the copy quantity.
18. ERROR lamp
This lamp lights when an error occurs and the equipment needs some actions to be taken.
19. [MONITOR/PAUSE] button
Use this button for on-hook transmission or pause entry. Pressing this button in the middle of
direct entry will display “-” as a “pause” on the screen.
20. Digital keys
Use these keys to enter the telephone and Fax numbers, ID numbers and password.
21. Touch panel
Use this panel for the various settings of each function of the copier, scanner and FAX. This
panel also indicates the status of the equipment, such as when you run out of paper or there
is a paper jam.