Tiger Products Co., Ltd CNH T6010-80 - Manual (Page 48)

ASSEMBLY
Assembly Section 2-16
NEW HOLLAND PRIORITY VALVE USED ON
DELTA & VALUE UNITS (HUSCO)
The Delta and Value units need a NH priority valve plug in the tractor rear remotes for the
proper hydraulic flow. Torque the body of the plug first to 94Nm and then the small end to 15Nm.
The ports used are directly under the valve mounting plate. The illustration below shows these
ports are in a row. From left to right the ports are used for “return from Husco valve”, “plug to
allow activation of the next two ports”, “return from PB port on Husco valve” and “pressure to HP
filter”.
The pressure hose is routed from the tractor remotes to the inlet port of the HP filter on the
valve mounting bracket. Then, the outlet port of the HP Filter to the pressure port of the lift valve.
The power beyond line is routed from the port on the Husco valve to the power beyond port
on the tractor rear remotes.
The return hose runs from the return port of the Husco valve to the tractor remotes.
For more information refer to the Parts Section pages for a complete diagram of the tractor
valve hookup.
(ASM-NH-0063)
PRESSURE
PORT
RETURN
PLUG
PRIORITY VALVE
PORT
POWER BEYOND
PORT
NEW HOLLAND TRACTOR
REMOTE PRIORITY PLUG