Tiger Products Co., Ltd CNH T6010-80 - Manual (Page 50)

ASSEMBLY
Assembly Section 2-18
HIGH PRESSURE FILTER
(CABLE CONTROL)
The high pressure filter is mounted to the right valve mounting bracket with hardware, as
shown in the parts section. Attach the two adapters to the filter. The pressure line from the trac-
tor is plumbed to the left (Inlet) side of the filter. The pressure hose that is attached to the right
side of the filter is routed to the pressure port of the Tiger lift valve.
(ASM-C-0031)
MANUAL SWITCH BOX MOUNTING
The switch box is to be secured to the operators side of the control handles, or valve stand.
Refer to the parts section for assembly and components needed.
(ASM-C-0053)