Technics DP-1810P - Manual (Page 18)

18
NOTE
Book/Edge/Margin
Creative Features
■ Book Key
Eliminates dark inner binding shadows when copying from a book.
■ Edge Key
Creates a blank edge.
■ Margin Key
Shifts the image to the right or left.
■ ■ ■ ■ ■ Procedure
∗
Initial setting (Factory setting) can be changed in the User Mode function.
(See page 27)
∗∗
If a part of the copied image is missing when using the Margin mode, change the
Frame Reduction setting to ON.
(See page 27)
C Press the RESET key to cancel all job settings.
Book
∗
Initial setting (Factory setting): 20 mm
∗
Initial setting (Factory setting): 5 mm and Equal Rate
∗
Initial setting (Factory setting): 10 mm and Left Margin
Edge
Margin **
1
Place the
Original
2
Press Book, Edge or
Margin key
5
Press
START
4
Number
of Copies
BOOK MARGIN
CENTER VOID = 20mm
∨∧
EQUAL RATE
VOID MARGIN = 5mm
∧
LEFT MARGIN
10mm
∨∧
3
Press Cursor ( G or F ) keys to adjust
the void width while the button is
blinking. (approx. 5 sec.)
C Void/Margin width: 5-99 mm