Technics DP-1810P - Manual (Page 3)

3
Operation Chart
Common Features and Usage
■ ■ ■ ■ ■
Basic Operation
Original
1
Place the
Original
2
Original Size
(Reduction/
Enlargement
Only)
3
Copy Size
(Reduction/
Enlargement
Only)
4
Number
of Copies
5
Press
START
■ ■ ■ ■ ■ Position of the Original
Load Paper
Turn Power
Switch On
INV
INV LTR LGL LDR
LTR
LDR
INV
LTR
LGL
INV
INVOICE
INVOICE R LETTER R
LEGAL
LEDGER
Original Guide
C Place originals face down on the platen or face up on
the ADF.
C If the original is not positioned properly, a portion of the
original may not be copied.
C For originals smaller than invoice size, position the
original within the area of INVOICE and select invoice.
■ ■ ■ ■ ■
Commonly Used Functions and Operating Procedures
Full Size
Makes a copy that is the same
size as the original
1 4 5
Reduction or Enlargement
Copies the original at a fixed
reduction or enlargement ratio
1 3 4 2 5
■ ■ ■ ■ ■ Memory Capacity
When the memory becomes full during original scanning, the message “Function not available
for lack of memory” will be displayed in the message display. In this case, follow the operating
instruction in the message display.
When additional memory is required, consult with an authorized servicing dealer.
(See page 12)
(See page 13)
Getting T
o
Kno
w
Y
our
Mac
hine