Technics DP-1810P - Manual (Page 28)

28
Function
General Functions for Key Operator
No. Modes
Initial
Setting
Function
NOTE
Selects the Control Panel reset time.
C OFF, 30 sec, 1 min., 2 min., 3 min.,
4 min.
Selects the message language of the display.
C A-ENGLISH, C-FRENCH, SPANISH
AUTO RESET TIME
LANGUAGE DEFAULT
05 Sets the paper tray for special paper (ex: colored).
C NONE, TRAY 1, TRAY 2, BYPASS
SPECIAL TRAY 1 NONE
Sets the Energy Saver mode and time.
C INVALID, ENERGY-SAVER, SLEEP
Energy save mode timer : 1-120 minutes
Sleep mode timer
: 1-120 minutes
ENERGY SAVER MODE
1 min.
SLEEP
A-ENGLISH
KEY/TOUCH BEEP Sets the panel touch sound.
C OFF, SOFT, LOUD
SOFT
01
02
04
09
Consult
your
service
technician. Monitors copy usage of each department.
(1) TOTAL COUNTER
(2) DEPT. COUNTER
(3) DEPT. COUNTER LIST DEPT. COUNTER MODE
∗
Sets the IP Address assigned to your machine.
C 3 digit × 4 (Use the MEMORY IN key to
enter the "." between each set of 3-digit
numbers)
TCP/IP ADDRESS
∗
Sets the Subnet Mask.
C 3 digit × 4 (Use the MEMORY IN key to
enter the "." between each set of 3-digit
numbers)
TCP/IP SUBNET MSK
∗
Sets the Subnet Mask.
C 3 digit × 4 (Use the MEMORY IN key to
enter the "." between each set of 3-digit
numbers)
TCP/IP G/W ADDR.
14
22
23
24
C It is necessary to input the Key Operator ID code before changing items on
this page.
C The Special Tray 1 and 2 are not auto-selectable in the switching mode.
∗
Not available for plain copier, but will be available when installing options
for advanced functions. (See page 50)
Sets the paper tray for special paper.
C NONE, TRAY 1, TRAY 2, BYPASS
SPECIAL TRAY 2 NONE 06
Sets the sound when put paper(s) on bypass
tray.
C 1: INVALID 2: VALID
BYPASS SET BEEP INVALID 10
Sets the sound when put paper(s) on ADF.
C 1: INVALID 2: VALID
ORIG.SET BEEP ADF VALID 11
Prints list containg Current Setting and
Standard Setting. COPY SETTING LIST 25
Contact
your
Network
Adminstrator.
Contact
your
Network
Adminstrator.
Contact
your
Network
Adminstrator.